Duluth UDC § 913.01
Curb and Gutter
Governing jurisdiction
Duluth
Land inside these city limits is governed by Duluth's own code and boards. A "Duluth, GA" mailing address is not proof of being inside them — most such addresses fall in unincorporated Gwinnett.
Boundary: US Census TIGERweb (Incorporated Places, ACS 2025 vintage), vintage 2025.
- Article
- 9 — Project Design and Construction Standards
- Pages in source
- 258–259
- Adopted
- 2025-09-08
- Amended through
- 2026-07-13
- Source
- Adopted PDF
Text
All new streets and Project Access Improvements shall be provided with curb and gutter except in subdivisions
zoned R-100, and subdivisions zoned RA-200, where swale ditches may be provided in lieu of curb and gutter at
the city’s discretion. All gutters shall drain smoothly with no areas of ponding.
257 | P a g e
Article Nine. Project Design and Construction Standards
1. Residential Curbing. Residential curbing shall meet the following requirements:
a. Concrete shall be Class "A" (as defined by Georgia D.O.T.) and have a minimum strength of 3,000
PSI at 28 days.
b. Typical minimum section shall be 6” x 24” x 12”.
2. Industrial or Commercial Curbing. Industrial or commercial curbing shall meet the following requirements:
a. Concrete shall be Class "A" (as defined by Georgia D.O.T.) and have a minimum strength of 3,000
PSI at 28 days.
b. Typical minimum section shall be 8" X 24" X 14".
3. Principal and Major Arterials Curbing.
a. Concrete shall be Class "A" (as defined by Georgia D.O.T.) and have a minimum strength of 3,000
PSI at 28 days.
b. Typical minimum section shall be 8" X 30" X 14.