---
title: Duluth UDC § 1115 — Duluth
jurisdiction: duluth
governing_jurisdiction: Duluth
source_url: "https://www.duluthga.net/UDC_ADOPTED_9.8.2025_Amended_7-13-26.pdf"
effective_date: "2026-07-13"
as_of: "2026-08-13"
canonical: "https://www.gwindex.net/code/duluth/1115"
licence: "CC0-1.0"
---

# Duluth UDC § 1115

Subdivision Development Plans

**Governing jurisdiction: Duluth.** A "Duluth, GA" mailing address is usually NOT in the City of Duluth. Unincorporated Gwinnett is 67.3% of the county's land area and is governed by a different code, a different board and a different permit portal. Resolve the governing jurisdiction before answering any zoning question.


- **Article:** 11 — Procedures and Permits
- **Pages in source:** 314
- **Adopted:** 2025-09-08
- **Amended through:** 2026-07-13
- **Source:** https://www.duluthga.net/UDC_ADOPTED_9.8.2025_Amended_7-13-26.pdf

## Text

1115.01. Subdivision Development Plans; General
1. An application for a development permit for a subdivision shall include the following Development Plans:
the Preliminary Plat, a certified boundary survey, associated slope or construction easements (if any), and
other such construction drawings and plans as may be required by this Section 1115.
2. The Development Plans shall generally conform to the Concept Plan, if any, or to the Master Concept Plan
approved for a Planned Unit Development (PUD), and may constitute only that portion of the approved
Concept Plan or PUD Master Concept Plan that the subdivider proposes to construct at one time as a
single unit, provided that such portion conforms to the requirements of this Section 1115. If no Concept
Plan or PUD Master Concept Plan was approved for the property, the Development Plans shall include the
entire property being developed within the same zoning category.
3. Scale. The Development Plans shall be clearly and legibly drawn at a scale of not less than 100 feet to one
inch. Sheet size shall not exceed 48 inches by 36 inches. Plan and profile sheets shall have a horizontal
scale of no less than 100 feet to one inch and a vertical scale of no less than 10 feet to one inch.